www亚洲视频-www亚洲色图-www亚洲精品-www亚洲国产-青青草99热这里都是精品-青青草99热久久

Language:CHINESESENGLISH

Home > News > Foshan Steel: Steel construction door optimal planning methods and procedures
CONTACT US
  • Address:Pingtang Industrial District, Shipeng Village, Shishan Town, Nanhai District, Foshan City,
  • Phone:0757-81002668/0757-63323396
  • Fax:0757-81196682
  • Contact:Ben Zheng/13826981293 Kerry Lu/13751224830
  • E-mail:sbs@sbsprefabhouse.com
  • URL:http://m.huihuitaotao.cn

Foshan Steel: Steel construction door optimal planning methods and procedures

Time:[2014-12-10]  Hits:5512

Foshan Steel: Steel construction door optimal planning methods and procedures

     Lightweight steel door frame structure with low cost, light weight, easy installation, short construction period, etc., so the rapid development in recent years, in industrial plants has been more widely used. However, in practice in project planning, especially the steel rod structure is constructed of steel portal frame variable cross-sectional dimension need to go through multiple spreadsheets in order to determine, together with the experience of the current planners planning such a structure is not rich, so the plan is not efficient , the rod cross-sectional dimension of choice is also quite reasonable, simple structure resulting in all the various stress uneven bars, not only economic indicators is not ideal, and safety of the entire structure is not high, even some projects will be too much stress the individual rods planning exceed the material strength. Even stress after plastic deformation of steel construction material considerations redistribution, it is still possible to make the whole structure of the existence of certain security risks.
     When optimizing policy making steel gantry structure plan, should be under the premise of ensuring safety construction, so that the amount of steel structure of most provinces, the cost to a minimum. This is what we used to optimize the principle of optimal planning method. In a useful planning, the door frame steel structure of steel consumption and cost structure in turn resolution cross-sectional dimension of the rod, the. Therefore, our optimization approach can be directly reduced to how to select the economically reasonable cross-sectional dimension, so that it meet the strength, stiffness and stability needs of the premise, the minimum cross-sectional area.
     Optimization methods and optimization of steel truss structure similar to the mast {TodayHot} steel structure optimization method also uses the asymptotic full stress method, which bars the door frame steel structure after several computational analysis to select amend its cross-sectional dimension, it or as close as possible to achieve the full stress state, cross-sectional dimension of the rod until the entire door frame steel structure without amendments so far, so that the door frame steel structure of the minimum amount of steel in order to achieve the lowest cost optimization approach. Member cross-sectional dimension of the amendment, which is the cross-sectional dimension of the optimization, the method is chosen seeks its cross-sectional dimension in the plane, the two directions of the plane of maximum flexural resistance torque, while its cross-sectional area of the smallest, namely under external loads, Select the cross-sectional dimension of both to be able to meet the strength, stability, strength of demand planning checking the component materials, but also to make the most amount of material province. Specific optimization method is omitted here.
     Steel door frame structure optimization analysis based optimization method used steps and constraints, optimization analysis step gantry steel structure is as follows: Step 1: Determine the door architecture made an initial cross-sectional dimension members, the software is generally made on the basis of cross-gate architecture OK, but also by the planning staff to determine; the second step: making door architecture mechanical analysis using finite element variable cross-section rods various operating conditions, load combinations, strength and stability checking; third step: According to the practice of loading effect, each kinds constraints, using full stress-section optimization methods to re-optimize the selection gate structure made each rod cross-sectional dimension; more than second and third step can be repeated cycles, each cycle is complete optimization options, until the selected cross-sectional dimension of the a cross-sectional dimension entirely consistent so far. Step four: Checking door architecture made beams, columns, and each point needs to meet the relevant norms, such as the press does not meet a certain share of the adjustment parameter optimization sectional dimension reference section is full of stress optimization method, and then repeat the second, three-step cycle optimization, until the points gantry steel structure to meet the requirements of all components of the deformation is demand.
     Realize full stress optimized cross-sectional dimension, the cycles are more generally more than 10 times before convergence is achieved mast stiffness to meet the needs of cross-sectional dimension distortion optimization less frequently, usually 1-3 times to meet the demand.

Copyright:佛山市勝邦鋼結構有限公司 Foshan Shengbang Steel Structure Co., Ltd. Record Number:粵ICP備13078463號
主站蜘蛛池模板: 天堂资源中文在线 | 午夜欧美精品久久久久久久 | 伊人99综合| 军人做受xxxxx军人gay | 亚洲欧美精品一区二区 | 青娱乐黄色 | 午夜小视频免费观看 | 青草国产在线视频 | 免费观看视频成人国产 | 久久性生大片免费观看性 | 亚洲精品123区在线观看 | 99精品欧美 | 亚洲欧洲一区二区三区 | 免费在线看视频 | 偷拍久久网 | 麻豆精品在线视频 | 青草视频在线观看免费视频 | 日韩美香港a一级毛片 | 91综合久久婷婷久久 | 欧美日韩国产综合 | 曰批免费视频观看40分钟 | 99色综合 | 日日摸人人拍人人澡 | 久久伊人精品 | 春日樱桃小说 | 久久亚洲这里只有精品18 | 美女扒开下面让男人捅 | 亚洲综合中文网 | 色噜噜狠狠狠综合曰曰曰88av | 天天摸天天干 | 深夜视频在线观看免费 | 欧美日韩另类在线观看视频 | 婷婷影院在线观看 | 毛片在线观看视频 | 免费国产成人高清在线观看视频 | 久草热8精品视频在线观看 久草免费在线色站 | 车车好快的车车污网站rh | 色视频免费网站 | 初恋视频污 | 日本三线免费视频观看 | 四虎在线影视在线影库 |